BOLTED CONNECTION
RAIL FIXING CLIPS

Bolted Installation
Prepared support

Maintenance Access
Removable assembly

Adjustment Options
Model dependent 

System Matching
Rails, pads & soleplates 

What Is a Bolted Crane Rail Clip?

A bolted crane rail clip is an adjustable clamping plate that locks the rail foot to the shim by means of bolts passing through the rail support—with a lateral load capacity of 21–300 kN and a lateral adjustment range of 10–24 mm; it can be reopened without cutting the weld.

Our bolted rail fixing clips feature a removable design and offer various adjustment configurations, making them suitable for new crane track installations, replacement of existing rail clamps, and equipment maintenance projects.

Glory Rail not only provides products, but also offers services such as rail cross-section verification,
rail clamp selection, technical drawing review, and crane track fastening system solutions.

Looking for bolted rail clips for a new project or replacement? Send us your rail profile or existing clip drawing for technical matching.

Find the Right Crane Rail Clip for Your Project

Glory Rail offers a variety of bolted crane rail clips designed to meet different crane rail fastening requirements.

Each through-bolt rail clamp is supported by a bolt that passes through the rail, and uses an adjustable wedge to clamp the bottom of the rail. The differences between the series lie in the body design, clamping nose, adjustment range, and installation width—Series 3 and 4, as well as Series 7, use soft-mounted rubber-nose fasteners; Series 25 features a fully sealed cam body; and Series 6 has no rubber nose—so please verify the track conditions and available space alongside the rails first.

ModelSeriesLateral adjustmentHorizontal force · 8.8Horizontal force · 10.9Min. mounting width*
3112/10Double-wedge3 & 4 series10 mm21 kN30 kN92 mm
3124/20Rubber nose3 & 4 series20 mm125 kN140 kN170 mm
3224/20Rubber nose3 & 4 series20 mm250 kN300 kN170 mm
3226/15Rubber nose3 & 4 series15 mm250 kN300 kN150 mm
6124/20Cam · no nose6 series20 mm125 kN140 kN149 mm
7120/10Low profile7 series20 mm75 kN100 kN95 mm
4116/10Rubber nose3 & 4 series10 mm38 kN50 kN100 mm
4120/15Rubber nose3 & 4 series15 mm75 kN100 kN129 mm
4124/15Rubber nose3 & 4 series15 mm125 kN140 kN140 mm
2520/24Cam · sealed25 series24 mm75 kN100 kN184 mm
2524/20Cam · sealed25 series20 mm125 kN140 kN180 mm
2530/14Cam · sealed25 series14 mm200 kN—180 mm

Not Sure Which Model Matches Your Rail?

Submit drawings of the rail cross-section and support structure, along with the required quantity.
Glory Rail will assist in comparing the available options and identify any additional technical information needed to finalize the selection.

Four Inputs for a More Reliable Selection

1

Confirm the Rail
Profile

Please provide the rail standards, cross-sectional types, and rail base dimensions. If you are unable to confirm the rail type, you may submit drawings with dimensional annotations.

2

Define the Design Requirements

Provide the crane’s existing wheel load, design horizontal load, duty class, and project technical specifications. Do not select a model based directly on unverified general load estimates.

3

Check the Supporting
Structure

Check the width of the support surface, the locations of pre-drilled holes, the installation clearance, adjustment requirements, and the layout of rubber pads or steel shims.

4

Confirm the Operating Environment

Describe the corrosive environment, maintenance space, on-site installation conditions, and the project’s specific requirements for technical documentation.

Looking for An Alternative to Existing Gantrex Bolted Rail Clips?

Glory Rail offers a variety of bolted crane rail clips, which can be evaluated for compatibility as
replacements for certain existing crane rail fastening systems.
Our 3116, 3120, 3124, 3220, and 3224 models are suitable for selection in replacement, repair, and rail refurbishment projects.

Engineering Details of Rubber Nosed Clips

Rubber-nosed rail clips are equipped with elastic contact elements at the point of contact with the rail base. For specified models of rubber-nosed rail clips, the geometry and height of the contact elements should be verified in conjunction with the rail cross-section and the arrangement of the track rubber pads.

  • Vulcanized Rubber Block: A vulcanized rubber blocks can be combined with the corresponding rail clamp components to form the elastic contact interface required by the design. Their function should be evaluated in conjunction with the entire assembly.
  • Self-locking Mechanism: Glory Rail can help determine whether the selected components include a self-locking mechanism and identify the corresponding installation requirements.

Bolted Rail Clip Installation and System Coordination

Proper installation of bolted rail clips should begin with a verification of the support structure. Before tightening the assembly, check the hole positions, support width, rail alignment, and the orientation of the components.

For through-bolted rail clips, a thorough inspection of the entire bolted connection should be conducted, including the pre-drilled holes, bolt assemblies, installation clearance, and specific model requirements.

1

insert bolts through holes in rail supporting structure

Check and Position the Rail

Check the support structure and mounting hole locations, position the rails, and verify their alignment.

2

install the rail clip assemblies

Install the rail clamp assemblies

Position each component in the specified direction

3

tap clip body towards rail along direction of slot in clip

Adjust the Rail

Adjust the rail position using the adjustment function of the selected rail clamp.

4

Tighten and inspect

Apply the specified torque, and check the contact between the rail base and the ground, as well as the condition of the assemblies.

Bolt grades, installation torque, and dimensional tolerances shall be specified in the applicable project specifications and product technical documentation; the same values shall not be applied to all models.

Where a Crane Runway Rail Clip Earns its Keep

In any situation where the track may need to be moved—such as expansion joints, crane realignment, phased construction, or situations where rails must be replaced without open-flame work—bolt-type crane rail clamps ensure that the entire running track remains removable.

Ports & container terminals

For shore cranes and tire-mounted gantry cranes exposed to salt spray, the steel rail fastening systems of the port cranes are realigned as the yard layout is adjusted.

A120

QU100

6 Series

Steel mills & rolling mills

Due to high temperatures, abrasion, and high impact loads on the running tracks, it is difficult to replace welded fasteners during brief shutdowns.

A120

QU100

6 Series

Shipyards & offshore

Gantry and hammerhead cranes at the dockhead—gantry crane rail clamps equipped with stainless steel fasteners and thick shims to facilitate cathodic protection.

A100

HDG

6 Series

Power & process plants

In the turbine building and maintenance crane area, the steel plates on the floor must not be welded, and the tracks will likely need to be removed in the future.

QU80

QU100

A75

Mining & bulk handling

The maintenance tracks for stacker-reclaimers and belt conveyors are affected by rail slippage, dust, and washing.

A120

QU100

HDG

Heavy fabrication shops

For overhead cranes installed in leased or modular factory buildings, the travel rails must be removable.

QU70

QU80

A65

Clip selector

Runs on Gantrail's published 12-model rating data — no interpolated values.

Bolt grade

Load here means design lateral force per clip, not crane wheel load. Don't know it? Send the wheel load, wheelbase and travel speed — we calculate it and return a clip schedule.

12 modelsFour published series
21–300 kNGrade 8.8 to 10.9
92–184 mmMinimum mounting width

Recommended clip

4124/15

3 & 4 series

Meets 100 kN at Grade 8.8 · any published adjustment

125 kN capacity · Grade 8.880% utilisation
Series
3 & 4 series
Adjustment
15 mm
Min. mounting width
140 mm
Ratings · 8.8 / 10.9
125 / 140 kN
Check price & lead time

System Compatibility

Rail, Rail fastening clip, pad and plate — one source

Fasteners are only half the story. The reliability of each rail fixing clamp depends on the rail type, bedding, and base plate it is installed on. Only when all components come from the same supplier can the geometric dimensions, hole patterns, and delivery dates be properly aligned.

Rails we supply for bolted fixing

Stock & mill order
StandardProfilesSeries to review
DIN 536 A55 · A65 · A75 · A100 · A120 · A150 3 & 4 · 25
Chinese QU QU70 · QU80 · QU100 · QU120 3 & 4 · 25
ASCE ASCE 60 · 75 · 85 3 & 4
Square bar 50 × 50 · 60 × 60 · 80 × 80 3 & 4

Series guidance only — the model is fixed by rail foot width, lateral load and the mounting width available.

Steel-reinforced continuous crane rail pads

Rail Rubber Pads

Can be cut to fit any rail type and is compatible with rail fasteners

continuous steel soleplate supporting crane rail on concrete foundation

Steel soleplate

Drill holes according to the fastener hole pattern; apply a hot-dip galvanized primer

rail fastener

Clip bolt sets

Grade 8.8 or 10.9 bolts and nuts, nuts and washers
—match according to the fastener selection chart

anchor bolts

Anchor bolts

Specifications are determined in conjunction with the fastener selection chart; an installation alignment template is included.

Frequently Asked Questions

Bolt-type crane rail clamps are attached to the precast support structure using bolts, while welded rail clamps are attached using a welded base. The specific choice depends on the project design, installation conditions, and maintenance requirements.

In rubber-nosed rail clips, the rubber contact components form part of the contact interface with the rail foot, and their geometry should be compatible with the rail cross-section and the arrangement of the track pads.

Yes. Glory Rail can evaluate replacement products for certain existing installation projects based on original product drawings, physical samples, dimensions, and fastening requirements.

Not all bolt-type rail clamps are adjustable. Refer to the corresponding product drawings for specific adjustment capabilities and ranges.

First, consider the space available alongside the rail base and the operating conditions. When space is limited, choose the 7 Series with the narrowest installation width—the 7120/10 model is 95 mm wide. The 3 and 4 Series are standard double-wedge series, rated at Grade 8.8 with capacities of 21–250 kN and an adjustment range of 10–20 mm. The 25 Series is a sealed, cam-adjustable series suitable for medium- to heavy-duty applications, offering the highest anti-lift load capacity (up to 90 kN). The 6 Series has no rubber nose and is typically hard-mounted; it is the published recommendation for shipyards and ship lifts.

Yes. Glory Rail provides replacement rail clamps, technical documentation, and related rail fastening accessories to crane maintenance companies and track renovation contractors.

Grade 8.8 is the published recommendation for standard operating conditions and is also the most economical option; some job sites permit only Grade 8.8. Upgrade to Grade 10.9 when larger couplers cannot be used but higher horizontal load-bearing capacity is required—for example, increasing the load capacity of 4124/15 from 125 kN to 140 kN. Before upgrading, verify the base plate grade and bolt spacing; never switch to a higher grade without first checking the base plate.

Please provide the rail model, any known preferred models, the required quantity, the application scenario, drawings of the support structure, and the delivery destination. If you need a specification sheet for adjustable rail clamps, please specify the rail adjustment requirements.

CLIENTS we've worked with

Get In Touch

glorycranerail-contact-footer

After submitting the form, your dedicated account manager will contact you immediately to provide full-process technical support from selection to installation.

Your Expert in Crane Rail Solutions

To help us provide a faster and more accurate tailored solution, please consider including:

1. Rail Specifications: Rail section type, profile, or standard, and your required unit length.

2. Order Quantity: Total quantity of rails, matching fasteners, or related equipment needed.

3. Material & Grade: Specific steel material requirements or performance grades.

4. Technical Files: Any custom technical requirements, drawings (CAD/PDF), or project specifications.

Don't have all the details? No worries! Just leave us a message with what you know, and our experts will guide you through the process.