ASCE 25 Rail
Glory Rail offers ASCE 25 rail, also known as 25-pound rail, which is suitable for light-duty track systems that have been verified for load capacity, gauge, and operating conditions. For engineering projects that require determination of track cross-sections, installation space, and connection methods, we not only provide track products but also assist customers in verifying technical specifications, fabrication requirements, and compatible fastening systems.
As an engineering and system integration center, Glory Rail can assist in evaluating the suitability of ASCE 25 rail dimensions, material requirements, rail joints, and fastening components based on project drawings, equipment specifications, and on-site installation conditions, providing technical support for rail selection and project implementation.
The Glory Rail team will give you the most timely reply and the most patient support
ASCE25 Rail Basic Dimension
| Rail Profile | Standard | Dimensions | Mass | |||
|---|---|---|---|---|---|---|
| Head Width | Height | Base Width | Web Thickness | |||
| ASCE 25 Rail | ASTM A1/ AREMA | 38.1mm | 69.85mm | 69.85mm | 7.54mm | 29.76 kg/m |
Mechanical properties of 25 LB ASCE Rail
| Materials | Tensile Strength (MPa) | Yield Strength (Mpa) | Elongation | Hardness (HB) |
|---|---|---|---|---|
| U71Mn | ≥ 880 MPa | ≥ 390 MPa | ≥ 9% | — |
| 55Q | 685 MPa | — | — | — |
| Q235B | ≥ 645 MPa | ≥ 390 MPa | 13% | — |
ASCE25 Rail Chemical Composition
| Materials | Chemical Composition (%) | |||||||
|---|---|---|---|---|---|---|---|---|
| C | Si | Mn | S | P | Cr | Ni | Cu | |
| U71Mn | 0.65-0.76 | 0.15-0.35 | 1.10-1.40 | ≤ 0.030 | ≤ 0.030 | ≤ 0.250 | ≤ 0.250 | ≤ 0.250 |
| 55Q | 0.50-0.60 | 0.15-0.35 | 0.60-0.90 | ≤ 0.040 | ≤ 0.040 | — | — | — |
| Q235B | 0.48-0.56 | 0.17-0.37 | 0.70-1.00 | ≤ 0.040 | ≤ 0.040 | ≤ 0.250 | ≤ 0.250 | ≤ 0.250 |
ASCE Rail – Custom Processing Services
Precision Length Cutting
Glory Rail supply custom-length ASCE crane rails (e.g., 6 m, 12 m, 20 ft, 30 ft, 40 ft, or any specified length) with smooth cut edges and a tolerance of ±1 mm.
Miter Cutting / Beveling
Supports 45° / 60° bevel cuts at the ends of rails (for expansion joints or smooth joints), as well as beveling for welding (beveled ends for thermite/flash butt welding).
Custom Drilling & Punching
Holes are drilled with precision according to customer drawings, strictly adhering to the ASCE rail drilling pattern specifications for hole spacing and diameter. We support two-hole, four-hole, and non-standard irregular hole patterns.
Rail Bending & Curving
Glory Rail provide horizontal and vertical cold-bending and arc-forming services for curves in industrial facilities, amusement park rides, and mining tracks.
Surface Coating & Treatment
Paint coating, sandblasting for rust removal, application of rust-preventive oil, or hot-dip galvanizing extend the service life in harsh environments.
Chamfering & Deburring
The rail ends are chamfered (2–5 mm × 45°) to prevent damage to the wheel flange during wheel transition. All drilled holes and cut edges are thoroughly deburred to ensure safe handling and installation.
Complete Rail Fastening System & Accessories Supplying
GloryRail offers a complete range of ASCEcrane rails (ASCE20-ASCE85), along with rail fastening systems and custom fabrication services. We provide one-stop supply solutions for crane projects in ports, steel mills, shipyards, warehousing and logistics, and heavy industry.
Rail Rubber Pads
GloryRail offers both individual rubber pads and continuous rubber pads, suitable for a wide range of crane rail systems. These rubber pads absorb vibrations, cushion impact loads, and evenly distribute wheel pressure, thereby extending the service life of the rails, foundation structures, and fasteners.
Crane Rail Clips
Rail clamps securely fasten the rails while allowing for appropriate movement due to temperature changes and operational loads. We offer welded, bolted, adjustable, and heavy-duty rail clamps suitable for various crane rail models.
Steel Sole Plates & Base Plates
GloryRail offers two types of steel pads and base plates.
Long-type base plates: Provide continuous support and improve wheel load distribution.
Short-type base plate: Suitable for stable positioning in compact support structures.
Anchor Bolts & Rail Fasteners
GloryRail offers anchor bolts, rail bolts, nuts, washers, and a variety of custom rail fasteners. These products provide a reliable connection between the rails, the fastening system, and the concrete foundation, ensuring long-term safe operation.
Rail Fishplates
Fishplates are used to connect rail joints and maintain track continuity and alignment accuracy. We offer both standard and custom-machined products to meet various track standards and project requirements.
Crane Buffers & End Stops
Crane buffers and end stops are designed to absorb impact energy and protect cranes, rails, building structures, and equipment from damage caused by accidental collisions. They are widely used in bridge cranes, gantry cranes, port machinery, and automated material handling systems.
CLIENTS we’ve worked with
Get In Touch
After submitting the form, your dedicated account manager will contact you immediately to provide full-process technical support from selection to installation.
Your Expert in Crane Rail Solutions
To help us provide a faster and more accurate tailored solution, please consider including:
1. Rail Specifications: Rail section type, profile, or standard, and your required unit length.
2. Order Quantity: Total quantity of rails, matching fasteners, or related equipment needed.
3. Material & Grade: Specific steel material requirements or performance grades.
4. Technical Files: Any custom technical requirements, drawings (CAD/PDF), or project specifications.
Don’t have all the details? No worries! Just leave us a message with what you know, and our experts will guide you through the process.